We are proud to have our own line of stoppers in chrome, black titanium, gold titanium, bright copper and solid Type 316 polished stainless steel.  All four of these stoppers are highlighted by the black silicone rubber wedge.  The thread size is the same as the Penn State Industries and Craft Supplies USA stoppers of the same design (3/8"-16 threads per inch).  This kit will accommodate bottles having a 5/8" to 13/16"  neck opening.

To order Bright Copper BHW-468  Click Here

"Type 316—the second most common grade (after 304); for food and surgical stainless steel uses; Alloy addition of molybdenum prevents specific forms of corrosion. 316 steel is used in the manufacture and handling of food and pharmaceutical products where it is often required in order to minimize metallic contamination. It is also known as "marine grade" stainless steel due to its increased resistance to chloride corrosion compared to type 304. SS316 is often used for building nuclear reprocessing plants. Most watches that are made of stainless steel are made of Type 316L;....."

The hobbyist also has the option of altering the finish of this stopper.  These stoppers can be glass-beaded for a satin finish, they can be buffed to a higher gloss and they can be jeweled without having to worry about working through any plating since there isn't any plating. 

  $8.99  AZSBSM-01
The collar acts as a bushing for the proper sizing to match the bottle stopper
Click Here To Order

11/32" Norseman TM Drill Bit  $5.65
Click Here To Order

Click here to order the drill chuck with #2MT arbor.  Price is $36.95

Click Here to order the drill chuck with a #1MT arbor.  Price is $36.95

 

3/8"-16 Norseman Bottom Tap $3.95

5/16" Norseman Drill Bit $4.49
(for use with the 3/8"-16 bottom tap)

Large Tapping Handle  $9.50
 

Bottle Stopper Buffing Handle

 
 

Have you ever had the sad experience of having a finished bottle stopper blank get 'caught & thrown' by a buffing wheel?  Using our Delrin handle will give you a much more secure way of buffing the stoppers and not having to worry about dodging a run-a-way stopper block.  The handle is 7" long and comes complete with two Delrin bushings for shallow or deep 3/8"-16 threads. This handle will work with the BHW-465, -466, -467, -468 and the -469 series stoppers.

$11.35

Click Here To Order

Please refer to Methods #1 and #4 pictured at the bottom of this page to see how this chuck is used.
 

We are proud to supply two additional platings of Berea's classy premium bottle stopper - black titanium and gold titanium.  The all chrome stoppers have been available for some time and we wanted to do something different with them and we believe we have.  The rich black titanium and gold titanium plating is highlighted by the whiteness of the "O" rings and, as you can see in the pictures below, they really are exceptional.  The long lasting titanium plating over the solid brass body gives these stoppers a feel not offered by other stoppers.  Each stopper weighs approximately 3 1/2 ounces. These are perfect for that special piece of wood that you've been holding back.

Redwood Burl with turquoise cabochon

Pearlized red acrylic

Gold stabilized boxelder burl with turquoise stone inlay

Buckeye burl

These four stoppers were made and photographed by Ed Davidson

The Berea All-Chrome stoppers are made of solid brass with a heavy chrome plating and come with two FDA approved clear rubber "O" rings (not black as shown in the top picture).  This stopper weighs 3 1/2 ounces (not including the top) and will accommodate a bottle having a 3/4" opening or larger.  The all-chrome stoppers can easily be washed and sanitized.  This is a premium stopper.

Left to right:
BHW-450 all-chrome, BHW-452 gold titanium and the BHW-451 black titanium stoppers

Tooling to make the creation of the BHW-450, -451 & -452 stoppers a little bit easier.....

 

1/4"-20 Norseman Bottom Tap $3.50

#7 Drill Bit $2.79 
(for use with the 1/4"-20 bottom tap)

Small Tapping Handle  $5.95
 Will not work with the 3/8" tap.